16:00 - 18:00
Poster Exhibition

S-01  Generating Meaningful Synthetic Ground Truth for Pore Detection in Cast Aluminum Parts

        Patrick Fuchs, Interdisciplinary Center for Scientific Computing (IWR), Heidelberg University, DE

S-02  Synchrotron based absorption edge tomography for the analysis of 3D printed polymer embedded MOF

        Christian Gollwitzer, Bundesanstalt für Materialforschung und -prüfung, DE

S-03  Analysis of Cone Beam Artefact Influences with Respect to Calibration of Metrology Qualified X-Ray Computed Tomogrophy Systems

        Dierck Matern, YXLON International GmbH, DE

S-04  Development of 950 kV X-ray source with small focal spot using a linear accelerator

        Norihito Matsunaga, Nikon Corporation, JP

S-05  Realistic Image Synthesis of Imperfect Specimens using Generative Networks

        Deniz Neufeld, Pattern Recognition Lab, Friedrich-Alexander-Universität Erlangen-Nürnberg, DE

S-06  Simulation-based sensitivity analysis of geometrical misalignments in X-ray computed tomography systems for dimensional metrology – detector angular misalignments

        Elia Sbettega, University of Padova, IT

S-07  Tools for the Analysis of Datasets from X-Ray Computed Tomography based on Talbot-Lau Grating Interferometry

        Bernhard Fröhler, University of Applied Sciences Upper Austria, Wels Campus, AU

S-08  Effect of iterative sparse-view CT reconstruction with task-specific projection angles on dimensional measurements

         Lorenz Butzhammer, Institute of Manufacturing Metrology, Friedrich-Alexander-Universität Erlangen-Nürnberg (FAU), DE

S-09  A low-cost and easy-to-use phantom for cone-beam geometry calibration of a tomographic X-ray System

         Van Nguyen, imec - Vision Lab, Department of Physics, University of Antwerp, BE

S-10  CT Measurement Realization Process: The Need for Advanced Correction Methods

         Crhistian Baldo, Federal University of ABC, BR

S-11  Optimisation of surface determination to improve the accuracy of detecting unfused powder in AM aluminium component

         Ahmed Tawfik, Huddersfield University, UK

S-12  Analysis of bone microdamage with X-ray microtomography towards fatigue fracture prevention

         Gerardo Presbítero, Institute of Theoretical and Applied Mechanics, Centre of Excellence Telč, Academy of Sciences of the Czech Republic, CZ

S-13  On nominal-actual comparisons for additive manufacturing applications

         Fabien Léonard, Bundesanstalt für Materialforschung und -prüfung, DE

S-14  An experimental study on segmentation in X-Ray Computed Tomography

         Stefano Petrò, Politecnico di Milano, IT

S-15  Custom-made software tool for the automatic implementation of surface extraction methods based on gradient operators

         Jose-Antonio Yagüe-Fabra, I3A, Universidad de Zaragoza, ES

S-16  Comparison of different voxel size calibration strategies

         Marko Katic, FSB, HR

S-17  Back-projection Filtration Image Reconstruction Approach for Reducing Out-of-plane Artifacts in Laminography

         Jeongtae So, Korea Advanced Institute of Science and Technology, KR

S-18   Possibilities and Limitations of Automatic Feature Extraction shown by the Example of Crack Detection in 3D-CT Images of Concrete Specimen

         Olaf Paetsch, Zuse Institut Berlin (ZIB), DE

S-19  MUSICES - Musical Instrument Computed Tomography Examination Standard: The Final Report Featuring Methods for Optimization, Results of Measurements, Recommondations, Check-lists and Meta-Data Models

         Theobald Fuchs, Fraunhofer Institute Integrated Circuits, Department for X-ray Technology, DE

S-20  A method and data pipeline for real-time tomographic cross-sections visualization and analysis

         Eusebio Solórzano, Novadep Scientific SL, ES

P-21  Exploratory research into reduction of scatter and beam hardening in industrial computed tomography using convolutional neural networks

        Ruben Pauwels, Katholieke Universiteit Leuven, BE

P-22  nvestigation of positioning accuracy of industrial robots for robotic-based X-ray computed

        ​Peter Landstorfer, Fraunhofer, DE

P-23  New training concept on industrial computed tomography for dimensional metrology

         Marco Menoncin, University of Padova, IT

P-24  Characterization and calibration of high resolution lab-based CT system with small field of view

         Pavel Blažek, Central European Institute of Technology, CZ

P-25  Suppression of residual gradients in the flat-field corrected images

         Michal Vopalensky, Institute of Theoretical and Applied Mechanics, Centre of Excellence Telc, Czech Academy of Sciences, CZ

P-26  CAD-based defect inspection with optimal view angle selection based on polychromatic X-ray projection images

         Alice Presenti, University of Antwerp, BE

P-27  Report of the Progress on a Laboratory X-Ray Source Based Computed Tomographic System for Full Field Microscopy at 9.25 keV

         Dominik Müller, University of Würzburg, DE

P-28 Verifying the measurement accuracy for X-ray cone-beam CT scans of objects smaller than 5 mm​

         Daniel Weiss, Carl Zeiss IMT GmbH, DE

P-29  Combined use of HeliScan µCT, ELITE and FIB-SEM systems for multi-modal and multi-resolution manufacturing quality control

         Grzegorz Pyka, Thermo Fisher Scientific, CZ

P-30  Porosity determination in additively manufactured Ti parts using X-ray tomography

         Jonathan Glinz, University of Applied Sciences Upper Austria, AU

P-31  Characterization of the effects of detector angular misalignments and accuracy enhancement of X-ray CT dimensional measurements

        Valentina Aloisi, North Star Imaging, US

P-32  Utilization of single point uncertainties for geometry element regression analysis in dimensional X-ray computed tomography

         Andreas Michael Müller, Institute of Manufacturing Metrology, Friedrich-Alexander-Universität Erlangen-Nürnberg, DE

P-33  A Curvelet based Sinogram Correction Method for Metal Artifact Reduction

         Kiwan Jeon, National Institute for Mathematical Sciences, KR

P-34  omographic investigation of the gothic sculpture

         Daniel Vavrik, Institute of Theoretical and Applied Mechanics, CZ

P-35  Influencing factors in x-ray spectral estimation of industrial CT using transmission measurements

        Wenchao Cao, Katholieke Universiteit Leuven, BE

P-36  X-ray sources for high throughput and extreme resolutions

         Emil Espes, Excillum AB, SE

P-37  Validation of a Method for the Optimization of Scan Parameters for Measuring with Computed​

         Raoul Christoph, TU Dresden, Werth Messtechnik GmbH, Deutsches Krebsforschungszentrum, DE

P-38  Optimization of multi-axis control for metal artifact reduction in X-ray computed tomography

         Toru Kano, Tokyo University of Technology, Shinshu University, JP

P-39  Roughness Investigation of SLM Manufactured Conformal Cooling Channels Using X-ray Computed Tomography

         Christopher Klingaa, Technical University of Denmark, DE

P-40  An attempt to detect anomalies in car body parts using machine learning algorithms

         Thomas Schromm, BMW AG, DE

P-41  CCD and scientific-CMOS detectors for submicron laboratory based X-ray Computed tomography

         Jakub Salplachta, Central European Institute of Technology, Brno University of Technology, CZ

P-42  Effect of gravity on porosity and surface roughness of SLM IN-625 parts

         Tobias Thiede, Bundesanstalt für Materialforschung und -prüfung, DE

P-43  Spot size and detector unsharpness determination for numerical measurement uncertainty​

         Florian Wohlgemuth, Institute of Manufacturing Metrology, Friedrich-Alexander-Universität Erlangen-Nürnberg (FAU), DE

P-44  Self-calibrating helical micro-CT and computed tomography dimensional measurements

        Trond Varslot, Thermo Fisher Scientific, CZ

P-45  Morphological study of defects in laminated joints of composite materials using microCT

         Cintia Guimarães Ferreira, Nuclear Engineering Program, Nuclear Instrumentation Laboratory, COPPE/UFRJ, BR

P-46  Using CT to Image and Investigate the Effect of Low-Velocity Impact Damages on the Structure of Fiber Reinforced Polymer Samples

         Crhistian Baldo, Federal University of ABC, BR

P-47  Error Investigations for a CT and Additive Manufacturing based Reverse Engineering Workflow

         Fabian Bauer, Siemens Corporate Technology, DE

P-48  300kV Open Type Microfocus X-ray source for Industrial X-ray CT

         Masayuki Hirano, Hamamatsu Photonics K.K., JP

P-49  Synthesis and characterization of metal-ceramic composite 316l/sycro

         Haimon Alves, State University of Rio de Janeiro, BR

P-50  Shape analysis for grains and pores on 3d digital images

        Andreas Grießer, Math2Market GmbH, DE

P-51  Study of keyhole-porosities in selective laser melting using X-ray computed tomography

        Aditi Thanki, Katholieke Universiteit Leuven, BE

P-52  3-in-1 X-ray Computed Tomography

         Nathanael Turner, The Manufacturing Technology Centre, UK

P-53  On the impact of probing errors on form measurement in Computed Tomography

         Jan Andreasen, Novo Nordisk A/S, DK

P-54  X-ray and FTIR µ-CTs for morphological and chemical characterization of eco-sustainable insulating foams

        Nicola Cefarin, Elettra Sincrotrone Trieste, INFN Trieste, IT

P-55  CT machine geometry changes under thermal load

         Benjamin A. Bircher, METAS, CH

P-56  Synchronous dual energy tomography system

         Pablo Pérez, University of Valladolid, ES

P-57  Lab-based Diffraction Contrast Tomography (LabDCT) for Materials Microstructure Characterization in Industry Applications

         Christian Holzner, Xnovo Technology ApS, DE

P-58  A versatile and compact laminography/tomography system

         Pablo Pérez, University of Valladolid, ES

P-59  Microstructural analysis of cement materials by lab and beamline techniques

         Luca Valentini, University of Padova, IT

P-60  Automated ROI Localization On Tomographic Projections

        Dmitry Ivanov, Moscow Institute of Physics and Technology, RU

P-61  Optimization of Resistance Spot Welding in Al Alloys for Light Weight Vehicular Structures based on comparative study of CT

         Asif Butt, CASE, PK

P-62  Safety first: Applications of computed tomography and X-ray refraction techniques to additively manufactured materials at BAM

         Giovanni Bruno, Bundesanstalt für Materialforschung und –prüfung, DE

P-63  3D Characterization of Class G Cement Paste Submitted to Heat Treatments

         Sidney Paciornik, Bundesanstalt für Materialforschung und –prüfung (BAM) and PUC-Rio, DE

P-64  Inspection of luggages with a spectral x-ray test bench

         Clarisse Fournier, CEA, FR

P-65  Virtual material characterization of composite materials in Simcenter 3D: micro-CT-based voxel approach for stiffness homogenization

         Oxana Shishkina, Siemens Industry Software NV, BE

P-66  Initial result on the use of tetrahedra-based imaging for limited angle tomography

         Ander Biguri, University of Southampton, UK

P-67  Laser driven sources for a new generation of high resolution hard x-ray CT machines

         Christopher Thornton, Central Laser Facility (STFC), UK

P-68  An example of nano-CT application at unconventional reservoir characterization

         Jae Hwa Jin, Korea Institute of Geoscience and Mineral Resources, KR

P-69  Evaluation of the sinogram-based iterative reconstruction algorithm in region-of-interest​

         Dragos Trinca, Universitatea de Vest din Timisoara, RO

P-70  Compression of CT Scans With Wavelets and Adaptive Thresholding

         A. Michael Stock, FORWISS, University of Passau, DE

P-71  Applications of Lab Based Diffraction Contrast Tomography

         James Carr, The University of Manchester, UK

P-72  A Transportable End-station for a Novel Inverse Compton Scattering X-ray Source

         Matthieu Boone, Ghent University (UGCT), BE

P-73  Application of X-ray CT for measuring of inner shapes manufactured by additive technique

         Bartosz Gapinski, Poznan University of Technology, PL

P-74  X-ray Inspection of TSV using Deep Learning Target Detection Algorithm

         Cunfeng Wei, Institute of High Energy Physics, Chinese Academy of Sciences, CN

P-75   Study on Energy Weighting Imaging Technology in Multispectral CT

         Zhe Wang, Institute of High Energy Physics ,Chinese Academy of Sciences, CN

P-76   Non Destructive Testing of CMC Engine Internal Parts from X-ray Tomographic Images

        Olivier Rodriguez, Voxaya, FR

P-77  Influence of raw materials on the mineralogy and microstructure of fired sanitary-ware vitreous body by synchrotron X-Ray Computed Microtomography and Diffraction Tomography

        Nicoletta Marinoni, University of Milan, IT

P-78  Development of Reference Samples to Study the Effects of Systematic Errors of Industrial X-ray Computed Tomography

         Wenjuan Sun, National Physical Laboratory, UK

P-79   ntCT: a Nano Computed Tomography System

         Christian Fella, Fraunhofer, DE

P-80   2D Contour Reconstruction for Industrial Computed Tomography using Crease Cluster

         Maximilian Wattenberg, Institut für Medizintechnik, Universität zu Lübeck, DE

P-81   Case studies of predictive analysis and casting process optimization based on CT scans

         Marco Giogoli, Metrix3D, IT

P-82   Geometry Compensation of 3DPrinted Parts

         Gerd Schwaderer, Volume Graphics GmbH, DE

P-83   Is the metrotomography a reliable method to measure the dimensional and geometric specifications of technical parts? CT machine versus CMM machine - A practical approach

         Fernando Ferreira, CATIM - Technological Center for the Metal Working Industry, PT


© 2018 Sistema Congressi srl